Infrastructure Corrosion Resistant Coating

Infrastructure

From bridges and water towers, to sewage drains, power grids and even lampposts, maintaining a city’s infrastructure is a costly endeavor. As cities age there are hundreds if not thousands of parts of every city’s infrastructure that need attention, but each project requires a substantial financial commitment.

EonCoat can considerably lower both the cost of a project as well as the time required to complete it. Because it is:

  • 5x more corrosion resistant
  • Highly abrasion resistant
  • Nearly insoluble to chemical attack

EonCoat substantially lowers the cost of infrastructure maintenance in a number of ways:
Lower Expenditure for Materials

EonCoat costs about the same per gallon as most high performance coatings. However, it costs less to use:

  • EonCoat covers in one coat, requiring less paint
  • No need to recoat every few years since once coated with EonCoat it will not rust or corrode: EonCoat coatings achieve 90% of their final binding strength within 3 days, and continue to strengthen for years.
  • There is no need to purchase a separate primer when using EonCoat on most substrates, including metal, concrete and wood, yielding additional savings.

Lower Expenditure on Labor

Workers can get more done in less time, and they don’t have to go back to recoat the same project every few years, allowing them to move forward onto new projects instead of circling back to old ones.

  • Reduce prep-time dramatically because coating a surface with slight oxidation is ideal. Knock off loose rust with a brush blast and start coating.
    No prime coat needed
  • One-coat coverage can build to any thickness required, resulting in additional time savings

Finish Jobs Faster

Spray EonCoat from 35° F to 200° F and other than direct rain, weather is not a factor, allowing workers to continue when other coatings would have resulted in weather delays.

With no odor or VOCs, painters can coat indoors without affecting others nearby. Paying painters to work at odd hours or on weekends due to fumes is no longer a costly problem.

Show Your Commitment to the Environment

EonCoat is an inorganic mixture without any of the volatile organic compounds (VOC's) typically found in other coatings, and it requires 90% less CO2 to create EonCoat than the average high performance paint.

  • A 90% reduction in carbon footprint
  • Use less coating
  • Longer lifespan means less recoating
  • NO VOCs, No Odor, No HAPs

Learn more about making a commitment to sustainability by using EonCoat